 |
 |
 |
|
A single Stickman wire as a replacement or to have an extra for work and at home.
This is our 4th Generation MOTIONHeat Glove liners.
Using a carbon fiber heating element around perimeter of the glove, the liner provides heat to all 4 fingers and your thumb. The heat can be felt almost instantaneously when the gloves are turned on because of form fitting stretch of our polyester/Lycra material. Designed as a cycling liner, we also have a small patch of the heating element above the knuckles where it gets cold as you are riding through cold weather.
New for the 4th Gen gloves is the addition a cuff to hold our 12v 2.6ah battery. We also added a one touch silicon button for temperature control based on the feedback we received on our last batch of gloves.
The gloves still can be run with our Stickman wireset through a jacket so the battery weight can be moved off the wrist, but on request the cuff was added so the gloves can be run of an individual battery in the cuff. Now you don't need to worry about disconnecting your glove from the wire when removing the liner or moving around for everyday tasks.
Temperature control was highly requested based on the feed back on the gloves from last year, so we incorporated the same button from our heated vests to the MOTIONHeat glove liners. You can now turn the gloves on and off by holding the button for 2 seconds. While the gloves are on, you have high, medium and low setting for the temperature.
The Low setting is closest to normal body heat at 30°C and will give you a run time of 8 hrs.
The Medium setting at 40°C is what most people would find warm and gives a run time of 5 hrs.
The High setting comes in at a toasty 50°C that feels like your hands are next to a campfire and will run for 3 hrs.
- Heating Element : Woven Carbon Fiber
Glove material : Polyester and Lycra
Battery : 12v2.7ah Lithium Ion Battery
Charger : 12v1ah Lithium Charger
Runtime : - [Red] High: 3hrs
- [White] Medium : 5hrs
- [Blue] Low : 8hrs
Temperature: - [Red] High : 50°C
- [White] Medium : 40°C
- [Blue] Low : 30°C
How come it is a glove liner rather than a glove?When we first started looking into the heated gloves, we found there were 2 types. Liners and gloves. All the liners we looked at ran 8 volts at most, so the highest temperature we got from them was a measly 35°C for a very short duration. So while they had nice, slim and light features, the liners didn't the punch to get us through the -30°C to -40°C weather we get from time to time in Canada. Nor did they last us very long on the high settings which we only found to be warm.
The 12v gloves we looked at were very warm, but were very bulky heavy gloves and expensive. They were designed for motorcycles and snowmobiles so finger mobility wasn't a huge concern for them. Since we wanted a glove for cyclists, we need our fingers to be nimble to hit our shifters, brakes and hold onto the bike at the same time.
So we decided to take our product development skills from electric bike components and apply it to make a 12v glove liner for cyclists. The liners offered the advantage of being able to use multiple different gloves over top of the liner. We wanted 12v because it packed the punch we needed to get through the cold weather.
The 12v Battery is kind of bulky, is there a smaller battery?We've decided to stick with the 12volt battery for a couple of reasons. At a lower voltage, the gloves simply can't very warm. So while it is easy drop the voltage down so the battery can be smaller, it means you get a glove that performs very poorly in cold weather. 12 volts is also the common battery voltage for most automotive vehicles so our gloves with the right connection can also be hooked up to your car or motorcycle.
Why the option of using a wire to move the batteries from the wrist?When we first started with the gloves, we were making it to extend the cycling time for a electric bike, so we wanted to be able to hook up our gloves to the electric bike's battery. We also noticed from our testing of the motorcycle heated gloves that the battery weight was very noticeable if you needed to use your arms a lot. Moving the weight of the batteries from the wrist to a more comfortable chest pocket just seemed to be the practical thing to do. We've since added a cuff to the gloves that allows you to run which ever method you prefer.
Where are the heating elements on the glove? I'm wearing the gloves now and I still can't feel them.The reason we've gone with woven carbon fiber as the heating element is that it is very thin and flexible. In our Youtube video on the evolution of the MOTIONHeat glove liners, there is a shot of the carbon fiber heating element used in our gloves. Carbon fiber pretty much resembles hair, but heats up very quickly when a current is applied through it. Yes, we were just as surprised as you when we found out how this little bit of carbon fiber could provide heat without us feeling much of any wires while wearing the gloves.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Instant Heat using woven carbon fiber heating elements
- Full finger coverage as the heating element is around the perimeter of the glove
- One touch variable temperature control
- Ability to the mount the batteries in the glove or elsewhere
|
|
|
|
|
|
|
|
|
